EN
16
Instructions
1. Plug the current adapter into a suitable socket (see the label on the bottom of the
device).
2. Press the switch on the top of the device: the warning light on the top lights up
(green light) indicating that the device is working.
3. During therapy, keep the device in a vertical position to allow the correct
functioning of the device, and to achieve the greatest effectiveness.
4. The drug nebulization speed may be controlled by pressing ‘MIN’, ‘MID’ and ‘MAX’.
During child treatment, we mostly advise turning the knob to the ‘MIN’ position, in
order to help airway deposition.
5. Continue the treatment until a light mist is visible (drug nebulization generated by
the device).
6. After one treatment session, it is necessary to refill the water in the tank for the
next treatment.
Caution: normally, at the end of the treatment, a small amount of medicine
remains in the Medicine holder: this amount, called the residual volume, cannot
be nebulized.
Once the treatment is over:
1. Switch the device off by pressing the switch control.
2. Disconnect the current adapter from the power point.
3. Remove the current adapter from the socket on the back of the device.
4. Remove the blue connector from the nebulizer body, and the mask (or other
accessory) from the end of the extension tube.
5. Remove the blue connector from the extension tube.
6. Remove the medicine cup and sealed ring from the body of the device.
7. Remove the water from the water tank.
8. Wipe the water tank carefully with a soft cloth, and make sure that the water tank
and blue connector are completely dry.
9. Place the medicine cup, sealed ring and blue connector onto the body of the
device.
10. Place all the accessories into the box, together with the device.