MediaTek LinkIt™ Smart 7688 Duo Get Started Guide
© 2015, 2016 MediaTek Inc.
Page 8 of 27
This document contains information that is proprietary to MediaTek Inc.
Unauthorized reproduction or disclosure of this information in whole or in part is strictly
prohibited.
Figure 3 Connecting to LinkIt_Smart_7688 AP
The red LED will blink three times per second after you’ve connected to the
LinkIt_Smart_7688_XXXXXX AP.
If you have multiple LinkIt Smart 7688 Duo boards, power only one of them to prevent a name
collision. An alternative is to insert a micro SD card with a file that will change the name of the access
point after the board has booted up.
Keep in mind that once you’ve connected to LinkIt Smart 7688 Duo, your computer may no longer
have access to the internet – it’s now joining the Local Area Network formed by LinkIt Smart 7688
Duo, as shown in Figure 4.
