MediaTek LinkIt™ Smart 7688 Duo Get Started Guide
© 2015, 2016 MediaTek Inc.
Page 18 of 27
This document contains information that is proprietary to MediaTek Inc.
Unauthorized reproduction or disclosure of this information in whole or in part is strictly
prohibited.
Figure 14 LinkIt Smart 7688 Duo in Station Mode
Step3: Open terminal emulator and Sign in again
Once your host computer has joined the same Wi-Fi network, you can again connect to
LinkIt Smart 7688 Duo with
mylinkit.local
domain again through SSH as before.
Step 4: Check for Internet connection
Now check if you’ve established Internet connection by typing the following command in
the terminal window:
# ping –c 5 www.mediatek.com
If you see a screen that is similar to Figure 15, then you’ve connected to the Wi-Fi
network’s AP. The Wi-Fi LED will blink once every second indicating Station mode. If the
ping utility reports errors such as unreachable destination, check the setting of your
Wireless AP.
Figure 15 LinkIt Smart 7688 Duo in Station mode connected to a Wi-Fi AP
Next: Install Arduino IDE and Board Support Package
