MEDIATEK LinkIt 2523 HDK v11 User Manual Download Page 1

Page: 1 / 88

LinkIt 2523 HDK v11 User's Guide

Version:

1.1

Release date:

4 November 2016

This document contains information that is proprietary to MediaTek Inc. (“MediaTek”) and/or its licensor(s). MediaTek cannot grant you

permission for any material that is owned by third parties. You may only use or reproduce this document if you have agreed to and been

bound by the applicable license agreement with MediaTek (“License Agreement”) and been granted explicit permission within the License

Agreement (“Permitted User”). If you are not a Permitted User, please cease any access or use of this document immediately. Any

unauthorized use, reproduction or disclosure of this document in whole or in part is strictly prohibited. THIS DOCUMENT IS PROVIDED ON AN

“AS-IS” BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES OF ANY KIND AND SHALL IN NO EVENT BE LIABLE FOR ANY

CLAIMS RELATING TO OR ARISING OUT OF THIS DOCUMENT OR ANY USE OR INABILITY TO USE THEREOF. Specifications contained herein are

subject to change without notice.

Summary of Contents for LinkIt 2523 HDK v11

























































































Search results

Summary of Contents for LinkIt 2523 HDK v11

Reviews:

Related manuals for LinkIt 2523 HDK v11

Brands by name

Popular brands

MEDIATEK LinkIt 2523 HDK v11, User Manual

Search results

Summary of Contents for LinkIt 2523 HDK v11

Reviews:

Related manuals for LinkIt 2523 HDK v11

Brands by name

Popular brands