HD Player
Chapter 11: Remote Control Configuration
66
Rev. 6.4
To Edit Method settings
Click the Method name and then click the now active
Edit
button. This will produce the remote method wizard,
from where the required settings can be changed.
To Delete a Method
Click the Method name then click the now active
Delete
button. A confirmation prompt will appear, to prevent
accidental deletion.
Click the
Delete All
button to remove all methods from the table. Care should be taken using this option, since it
cannot be undone.
The following sections describe each page of the wizard.
The Remote Control Wizard - Method Type dialog
The first screen in the wizard requires two pieces of information, the method name and the physical connection
type. Every method must have a unique name, which is used to identify the method in the Log window. There are
currently two physical connection types, Serial (RS232) and TCP/IP.
Click on the list to select either Serial or TCP/IP
Click
Next
to advance to either the
Serial Control Parameters
page or the
TCP/IP Configuration
page.
Information for the Serial Control Parameters is given next, followed by information for TCP/IP Configuration.
Click here
