HD Player
Chapter 3: Transport & Status displays
31
Rev. 6.4
Chapter 3:
Transport & Status displays
The HD Player interface is similar to that of a simple tape player: The tape is played until it reaches the end, when
a rewind is required to play again. In the case of the HD Player this rewind (Cue) is near instant, but the metaphor
provides a useful description.
The Status display is linked to the Transport Controls and shows various pieces of useful information about the
current state of the HD Player.
Transport status
The transport status shows the current operating state of the HD Player. The display will show one of the
following messages.
Stopped
The Stopped indicator appears at Start-up of the HD Player software, only. The status will change when the first
file is cued.
Transport
Status
Frame
Counter
Current
Chapter
and File
Current
Timecode
Mode
Indicator
s
“Confidence
Display”
Transport
+ Output
Mode
Buttons
Cue To
Slider
