background image

Warning

• Follow all instructions.

• Do not place this device near water.

• Clean only with dry cloth.

• Do not block any ventilation openings.

• Install in accordance with the manufacturer’s instructions.

• Do not place near any heat sources such as radiators,

  heat registers, stoves, or the devices (including amplifiers) 

  that produce heat.

• Protect the power cord from being walked on or 

  pinched particularly at plugs, convenience receptacles,

  and the point where they exit from the devices.

• Power supply cords should be routed so that 

  they are not likely to be walked on or pinched 

  by items placed upon them or against them.

• Only use attachments/accessories specified 

  by the manufacturer.

• 

U

nplug this during lightning storms or when unused 

  for long periods of time.

• Refer all servicing to qualified service personnel. 

  Servicing is required when the devices has been 

  damaged in any way, such as power-supply 

  cord or plug is damaged, liquid has been spilled 

  or objects have fallen into the devices, 

  the devices has been exposed to rain or moisture, 

  does not operate normally, or has been dropped.

• Carefully read and follow the Quick Install Guide 

  and User Manual.

• Do not drop or shake the device.

• Do not move the device when it is powered on.

• Do not overload wall outlets.

Operation System

Windows 7 / Windows 8.1 / Windows 10

Mac OS X 10.12.5 or later

Hot-plug for USB-C interface
USB 2.0 / 3.0 / 3.1 compatible *

Note

1

Power On / Power Off

Power on

Blue

2

HDD 1 / HDD 2 Status

Link

Access

Error

Rebuild

Blue

Purple

Red (Steady)

Red (Blinking)

Front Panel

 │ 

Rear Panel

1

1

2

Overview

Cautions

Main Device  x 1
Quick installation guide  x 1
USB 3.1 Gen-II type C to C Cable  x 1
External Power Adapter  x 1
2.5" to 3.5" SATA HDD Bracket  x 2
Screw for securing for 2.5'' HDD * 2
Screw for securing for 3.5'' HDD * 4

Contents

Before using RAID enclosure

1. Do not use HDD with data to create any RAID Array

2. Changing RAID mode may cause data lost, backup 

   your data before making changes.

3. When both HDD are installed at the same time in any 

   RAID mode, all data will be formatted.

4. Check for visible damage on unit, accessories and cables 

   before using the device.

HDD format recommended

Windows 7       NTFS or exFAT

Mac OS X        HFS+ (Mac OS Extended)

Both Windows and Macintosh OS       FAT32 or exFAT

When using “RAID function”, 

HDD of the same capacity, model name 

and brand is strongly recommended.

USB 3.1 Gen-II / Type-C

For 3.5''

/

2.5'' SATA HDD or SSD

with Single, JBOD, RAID 0/1 functions

HDD Enclosure

Cautions 

│ 

Contents 

│ 

Warning 

│ 

Note 

│ 

Overview

Quick installation Guide 

│ 

Initialization 

│ 

Troubleshooting

USER

S MANUAL

Office website

www.mediasonicusa.com

http://forum.mediasonic.ca/

Online forum

HUR5-SU31C / Rev.01

* Additional cable required, cable converter adapters

  not recommended

Make sure connect the device to computer when power on 
                the device.

Summary of Contents for HUR5-SU31C






Reviews: