Electric Hand Dryer:
ZEFIRO HOT
ATTENTION: We invite to read carefully and to hold these instructions.
This manual supplies important informations regarding maintenance and use, installation, emergency. A wrong
installation can produce damages to persons or things, which the constructor cannot be thought responsible
about.
FEATURES
Tension
220 - 240 VAC
Frequency
50 - 60Hz
Absorption (power) total 1100 Watt
Protection Class
Class II
Air flow
187 cbm/h, 3117 l/m(version 1100Watt)
Dimensions 285 x 221 x 157mm
CE-CEI Compliance RoHS
– WEEE compliance
INSTRUCTIONS FOR INSTALLERS
THIS HAND DRYER HAS TO BE FIXED AT PROPER DISTANCE OF AT LEAST 60 CM FROM BATHTUB OR
SHOWER OR WASHBASIN.
Please verify that the electrical capacity of the system and the female plugs of current is adapted to the
maximum power of the apparatus.
Fix the dryer to the wall with the proper fixing box kit and mounting plate included in the box. Plug the dryer or
use the given dryer cable only also for concealed installation.
We suggest installing at least 120cm from ground ,by airoutlet distance
This product is not intended to be used by people with reduced physical, sensory, mental, or have a lack of
experience and knowledge, unless they are controlled by a person responsible for their safety.
Children should be supervised to prevent them from playing with the appliance.
If the power cord is damaged should be replaced by the manufacturer or person with similar technical
qualification, to prevent any risk.
OPERATING
The hand dryer comes into operation and automatically stops by hands approaching and moving away from the
cone air outlet.
Warning: In case of an overload of internal temperature, a thermostat with automatic reset protection suspend
the operation of the engine.
This device gives the user greater safety of operation.
Depending on the model chosen the air will be supplied with an air jet cone concentrate (ECO Stream) or with
a blade larger air flow (ECO Flow)
The device has a system that prevents vandalism continuous operation, caused for example by covering the
photocell.
If this occurs, the dryer can work without interruption for about 60 seconds, then automatically stops waiting for
(stand by)
It will be simply needed to remove the cover that blocks the photocells to ensure the dryer to
resume its normal function in 1 second.
