Media5 Mediatrix C710, Hardware Installation Manual

Page: 15 / 52

Mediatrix C7 Series Connectors and Indicators Hardware Installation Guide
Mediatrix C7 Series – Digital Gateway 3
Table 4 describes the rear panel connections (from left to right).
Table 4: Rear Connections of the Mediatrix C7 Series
Connection Description
1. Power connector External 12 Vdc power supply.
The Mediatrix C7 Series may use one of two power supply units:
• a 2.5A power supply. This is required for units with 8 FXS
ports and with the Long Loop version. In this case, a special
label is affixed over the power connector.
• a 1.5A power supply.
2. Reset / Default switch Resets configuration parameters of the Mediatrix C7 Series to default
(known) values. It can be used to reconfigure the unit.
Warning:
Read Section “RESET/DEFAULT Button” on page 18
before attempting to reset the unit.
3. USB connector TBD
4. ETH1 A 10/100 BaseT Ethernet RJ-45 connector for access to a LAN, WAN
or computer. This port is by default used for uplink / WAN connection.
5. ETH2 A 10/100 BaseT Ethernet RJ-45 connector for access to a LAN, WAN
or computer. This port is by default used for LAN connection.
6. FXO Port 1 - 4 4 x RJ-11 connectors offering SCN access for various VoIP endpoints
such as IP phones, FXS devices, softphones and IP-based PBX and
Key Systems.
7. FXS Port 1 - 4 4 x RJ-11 connectors to attach a conventional telephone or G3 fax
machine.