Copyright Media Technologies 1999 - 2008
Page 15 of 19
To adjust the fine position of an individual monitor, click on an individual monitor and adjust the
image position using the horizontal and vertical sliders.
The image may temporarily lose synchronisation if individual monitor alignment is adjusted too far
horizontally. Restore synchronisation by moving the slider back into range.
IMPORTANT
When you have finished aligning the image, click “Save” at the left side to ensure the
processor registers these values on power-up.
Repeat this procedure for each processor and each split (e.g. 2x2, 3x3) you wish to use. Each split
configuration has independent storage in flash. Exception is individual monitor alignment which is
fixed independent of the split.
You can adjust vertical and horizontal split values independently, for example an anamorphic 6x4
split can be adjusted by selecting X-split = 6 and Y-split = 4.
Additional information on connecting multiple processors can be found in
“technote_daisychain.pdf” supplied on the software CD.
Some example sequences for larger arrays are provided on the software CD.
