USER`S MANUAL
ME-TUN
File: ME-TUN Manual E.DOC
MEDIA ENGINEERING
page 13/29
B.1.3. THE INITIAL STATE
ME-TUN is memoryzing its settings during power-off and will - upon power up - display and
tune to the frequency that was received just before power was lost or switched off. This
frequency will be displayed in the top left position of the display after the startup sequence as
shown in “screen 2”.
screen 2
Approximately in the middle of the top row of the LCD display the FM channel mode can be
read out which is either "mono" or "stereo".
On the top right of the display there is featured an antenna symbol plus the letters ‘A’ or ‘B’ in
order to indicate the actual antenna input in use.
The lower half of the LCD display is showing one out of three possible information lines
(described in B.1.7.: SETTING THE INFO MODE on page 17).
When the ME-TUN is in its INITIAL state the keypad will be lit up as already presented in
“keypad 1” on page 12.
Important note:
ME-TUN resets and starts an internal timer each time a push-button
is activated. If an input sequence is not finished within a few seconds,
ME-TUN will automatically “fall back” to its INITIAL state. This feature is particularly
convenient if there’s happening a mistake during inputting a command, for a “clear” or
"reset" button is not necessary. One simply waits approximately 3 seconds and the keyboard
“falls back” to the INITIAL state.
102.025 MHz mono
Ұ
A
RFL |
■■■■
|
