USER`S MANUAL
ME-TUN
File: ME-TUN Manual E.DOC
MEDIA ENGINEERING
page 12/29
B.1. BASIC OPERATIONS
B.1.1. STARTUP SEQUENCE
After proper installation of the ME-TUN (refer to A.2. INSTALLATION PROCEDURE on page
7), flip the “OFF-POWER-ON” switch on the rear side to the “ON” rsp. upper position in order
to start up the device. Upon power on, ME-TUN enters the initialization sequence and
displays the firmware version information on its LCD display (screen 1).
screen 1
Simultaneously all keys on the keypad will light up briefly
1
. A few seconds later, ME-TUN will
enter the INITIAL state (refer to section B.1.3: INITIAL STATE on page 13)
B.1.2. LIT UP KEYS
ME-TUN has quite a large number of keys, but is nevertheless operated very simply.
Only
the lit up keys react on user input
. No matter in what position of the input sequence the
operator is, the ME-TUN will light up only those keys, which are meaningful for the next
keystroke.
1
2
3
LOAD
DISP
4
↑
PGM
5
↑
25kc
6
LOCK
0
SCAN
7
↓
PGM
8
↓
25kc
9
ANTA/B
SAVE
MENU
keypad 1: INITIAL STATE
“keypad 1” shows an example: The keyboard is ready for user input on keys 1,8,9,LOAD or
SAVE. All other keys are disabled and have no function. Thus, ME-TUN will guide you
through the required steps to set up the tuner as desired.
1
This serves as a test for the LED illuminated push-buttons.
B. OPERATING INSTRUCTIONS
ME-TUN R1.2
Media Engineering
