User guide P9-0158-B
28 of 60
Version 3.0.3 -2016
Medema A/S
Avoid draining the batteries completely. We recommend
charging the batteries in a heated room. If it is not possible to
do this every day, it is a good idea to charge the Mini Crosser in
a heated room (approx. 20°C) once a week.
New batteries do not reach full capacity until they have been
charged and discharged about 20 times.
It is IMPORTANT to fit the batteries correctly. The battery terminals
are /-. They must be fitted as shown in the sketch below.
Make sure that the terminals are properly closed. For the same
reason there must not be any burrs on the terminals.
The Mini Crosser should be charged while not in use. The
charger supplied from the factory switches over to trickle
charging (very low power consumption) automatically when the
batteries are fully charged. You can therefore leave the charger
connected until the Mini Crosser is next used. The charger
cannot overcharge the batteries.
The charger will flash until charging is complete. Then it will
show a steady light.
The charger must not be placed on the seat during charging.
IMPORTANT! Never use charging devices other than those
supplied from the factory without first contacting the dealer.
NEUTRIK NC3MX charging plug
Connect the charging plug to the 3-pin
socket on the joystick.
