1
2
3
4
5
6
Use the included large Allen wrench to loosen the bolts from
the bottom of the handlebar. Use the included small Allen
wrench to loosen the bolt on the front of the handlebar.
Use scissors (not included) to carefully remove the zip ties
that attach the cables to the handlebar. Do not cut the brake
cable or electronic wire.
Use an Allen wrench to remove the screw from the brake.
Push up firmly on the brake to remove the handlebar grip
and slide the brake off of the handlebar.
Remove the handlebar.
Use an Allen wrench to remove the screw from the throttle.
VR 550E
ELECTRIC SCOOTER
NOTE: BEFORE BEGINNING, ENSURE THE UNIT IS TURNED OFF.
IMPORTANT:
An ADULT must make all repairs. Thoroughly inspect all parts after making modifications. DO NOT RIDE until
you are sure the proper repairs have been made and the unit is assembled according to the manufacturer’s specifications.
If you are unsure of any repairs, contact consumer service.
