Medela symphon, Instructions Manual

Page: 7 / 25

Questions? Visit www.medela.com or call us at 1-800-435-8316.
13 12
Remove tubing from
breastshield.
6. Tubing Care
1
6
2
3 5
Caution
Unplug breastpump from
power source.
Remove tubing, protective
membrane, and membrane cap.
Clean following steps in section 4. Rinse tubing in cool water to
remove breastmilk.
• Wash tubing in warm soapy water.
• Rinse tubing with clear water.
• Hang to air dry or shake out any
drops of water from the tubing
and let the pump run with tubing
attached for 1-2 minutes until dry.
Turn off breastpump.
Supplies needed:
•
Mild dish soap
• Clean dish towel
• Clean sink or bowl
• Drinking quality water
• Damp (not wet cloth)
Parts needed:
• Tubing
• Symphony
®
pump
• Membrane cap
• Protective membrane
Note
Only wash tubing if condensation or
milk is present.
Breastpump kits are a personal
care item intended for use by a
single user only and should not
be shared between users. Refer to breastpump instructions
for use for important safeguards
and operating information.
Warning Warning
• Do not store wet or damp parts as mold
may develop.
• If tubing becomes moldy, discontinue
use and replace tubing. Contact Medela
Customer Service at customer.service@
medela.com or call 1-800-435-8316.
• Inspect tubing after each pumping
session.
4