17
Refer to figure
¢
7 on the foldout pages.
1.
¢
7-01 Wash hands thoroughly with soap and water before touching the motor unit,
parts of the collection cups and breasts. Dry your hands with a clean towel.
2.
¢
7-02 First assemble the valve of the yellow membrane on the front of the breast shield.
3.
¢
7-03 Align the disc of the yellow membrane on the designated circular slot using the
alignment tab at the top to ensure that it is at the right place. Press around the edges to
make sure it is fully assembled.
4.
¢
7-04 Insert the pouring spout into the opening on the shield.
5.
¢
7-05 Push the outer shell and breast shield together tightly, ensuring it is fully sealed all
the way around until you hear a snapping sound.
6.
¢
7-06 Connect the long end of the tubing to the motor unit as far as it will go.
7.
¢
7-07 Connect the short end of the tubing into the tubing connection port on the
collection cup.
7.3 Preparing for single pumping
Refer to figure
¢
8 on the foldout pages.
1.
Assemble one collection cups as described in
chapter 7.2.
¢
8-01 Insert the unused tubing end into the Y-shaped tubing holder.
¢
8-02 Correctly assembled system (for single pumping).
2.
¢
8-03 Place the collection cup in your bra according to
chapter 7.5
.
Start pumping as described in
chapter 9
.
7.4 Preparing for double pumping
Information
• Double pumping saves time and increases the nutritional value of the milk.
• For the delayed start function see
chapter 8.5
.
Refer to figure
¢
9 on the foldout pages.
1.
Assemble the two collection cups as described in
chapter 7.2
.
¢
9-01 Correctly assembled system (for double pumping).
2.
¢
9-02 Place the collection cups in your bra according to
chapter 7.5
.
Start pumping as described in
chapter 9
.
7.5 Placing collection cups within your bra
Refer to figure
¢
10 on the foldout pages.
1.
¢
10-01 Ensure that the nipple is centered in the tunnel of the breast shield.
2.
¢
10-02 The hands-free collection cups can be worn under your regular nursing bra.
Your bra will hold the collection cup in place. If you find it uncomfortable or painful
during use, try switching to a looser, more stretchy nursing bra.
3.
¢
10-03 The tubing can be connected facing inwards (towards the breasts) or outwards
(towards the arms) based on personal preference. Ensure that the tubing is not pinched or
bent during use.
4.
¢
10-04 The hands-free collection cups can be used in a vertical or slightly tilted position
for better visibility of the nipple and milk ejection. The scale on the collection cup gives you
an approximate indication of the volume during pumping.
