9
EN
Evenly spread liner within warmer cavity.
IMPORTANT: For good air flow and accurate warming, insert
should be spread out against the inner walls of the device.
4
IV
Open the lid of the device.
Expand the insert prior to installing it into the device.
Bend the insert at the hinge and place it into position.
Securely install insert using the tabs located on the back and
front of the device cavity.
NOTE: Device will not operate if insert is not installed
correctly.
3
Operation
VII
Acceptable breast milk containers:
• Bottles up to 250 ml (plastic or glass) with a maximum height of 161 mm.
• Syringes up to 60 ml (plastic).
NOTE: The Calesca Warming/Thawing Device is designed to warm only one container
at a time.
Plug the hospital grade plug into a wall outlet. Press the
power button on the device display panel.
The unit is setup with both a visual indicator located on the
front of the unit and a low volume audible indicator. To mute
the audible indicator, press the mute button. To confirm
that the audible indicator is muted, the symbol will appear
in the upper right portion of the LCD Display.
1
NEW IMAGE
Remove Medela Disposable Inserts from plastic bag. For
proper identification, patient labels can be placed on the bag
portion of the insert; or using a permanent marker patient
information can be written on the hard surface of the insert,
including date and time.
2
Insert installation
Place the tray, flat-side down, into the bottom of the device.
NOTE: Always use tray when warming syringes or bottles.
5