48
IT
Lo schermo dell‘apparecchio mostrerà, lampeggianti, le
informazioni inserite nell‘unità, e verrà visualizzato il tempo di
completamento. Se le informazioni sono corrette, premere il
tasto start
start
.
Se le informazioni non sono corrette, premere il tasto stop
stop
e ripetere le fasi nella sezione di scongelamento a partire dalla
fase 15.
17
Usare le frecce per inserire il volume di latte da scongelare.
La freccia rivolta a destra aumenta il volume. Tenendo
premuta la freccia destra , il volume comincerà ad aumentare
con incrementi di 10 ml. Usare la freccia sinistra per
diminuire il volume se necessario. Una volta raggiunto il
volume desiderato, premere il tasto enter
enter
.
16
L‘apparecchio si posiziona in automatico in modalità riscalda-
mento
. Per selezionare la modalità di scongelamento,
premere la freccia rivolta a destra sulla parte frontale dell‘unità
. Premere il tasto enter
enter
. Quando si sceglie la modalità
scongelamento, l‘unità seleziona automaticamente una
temperatura di partenza congelata .
15
Se il coperchio viene aperto durante il ciclo di mantenimento,
l’indicatore visivo lampeggerà di arancione e l’unità andrà in
pausa per 60 secondi. Se la siringa o il contenitore vengono
riposizionati nell’unità, è possibile premere il tasto start
start
e il
ciclo di mantenimento continuerà fino al completamento.
Se vengono superati i 60 secondi, l’unità si fermerà e si resette-
rà. Una volta terminato il ciclo di mantenimento, l’unità smetterà
di mantenere la temperatura. Emetterà un suono ogni 15 secon-
di (se l’indicatore sonoro non è spento) finché il latte non verrà
preso. Mescolare delicatamente il latte una volta completata
l’operazione.
NOTA: Aprire il coperchio per attivare la pausa mentre si utilizza
la siringa.
IMPORTANTE: Toccare sempre il contenitore/la siringa e con-
trollare la temperatura del latte prima della somministrazione.
14
Al completamento del ciclo di riscaldamento, l‘indicatore visivo
sull‘unità lampeggerà di verde e l‘indicatore sonoro (se non è
spento) suonerà. Al completamento del ciclo di riscaldamento,
l‘apparecchio passerà automaticamente ad un ciclo di mante-
nimento per fino a 30 minuti. Durante il ciclo di mantenimento,
continua a circolare nell‘unità aria calda mantenuta a temperatu-
ra corporea, per garantire che il latte non si raffreddi prima della
somministrazione. L‘indicatore visivo continuerà a lampeggiare
di verde. L‘indicatore sonoro (se non è spento) suonerà ogni
5 minuti.
13
NOTA: Calesca è stato studiato per riscaldare il latte a partire dalla temperatura del frigo-
rifero (circa 4˚C/39,2˚F).
Se il latte contiene ghiaccio all‘inizio del ciclo, la temperatura finale
del latte dopo il ciclo di riscaldamento potrebbe scendere al disotto dell‘intervallo previsto
dal dispositivo.
Modalità scongelamento
IV
Funzionamento
V