Page5
Power up and Standby
Plug the AC/DC adapter into the mains outlet and plug the DC Jack into the DC IN at the rear of the
MED400X2.
DO NOT USE ANY AC/DC ADAPTER AND ONLY USE THE ONE SUPPLIED
otherwise you
may cause damage to the unit. Press the On/Off button on the Mede8er’s front panel and front facia LED will
turn on Blue. You can put your Mede8er into standby by pressing the On/Off button on the remote. When in
standby the front facia LED will turn Red.
Y
Pb
Pr
OUT
HDMI
Connect LAN cable to router or switch
Optical Digital
HDMI - RJ45 Network - Toslink Connection to a TV or Amplifier
For digital audio connection to your Home Theatre System use the HDMI connector. If your amplifier does not
have HDMI connector than you can use the TOSLINK Optical Digital output. The MED400X supports both
Passthrough and Downmix for both Dolby Digital and DTS signals.
Y
Pb
Pr
OUT
