Med-Pat D2200-SIP, User Manual

Page: 4 / 35

D2200-SIPUser Manual
1 Introduction
Before using the SIPPhone, some configurations are required to make the IP Phone
work properly. Themanual will illustrate how to configure the ip phone via web page
1.1 Hardware Overview
Two RJ-45Networking interfaces support 10/100Mps FastEthernet. User can connect
WAN port to ADSLor Soft PBX,the LANport to PCcomputer. The default setting of WAN port is
a DHCPclient. The IP address of LANport is 192.168.2.1.
One 3.5mm Headsetjack is used to connect only Apple Type Headphonewith Mic.
(Usercan only control the headset volume by the Volume-Control keyson the top of the phone)
One mute LED, one on-hold LED, one hand-free LED and one LED that combine
functions of ringer and message-waiting.
The power is only supplied by switch hubs with POE(Power over Ethernet). There is
no anyjack for external power adaptor.
Page4