D2200-SIPUser Manual
2.5.2
LANSettings
Set network parameters for LAN port. user should refer to current network
environment to configure the IPphone properly.
2.5.2.1
LANMode
Bridge Mode means the WAN port and LAN port are transparent.The IP address of
the device which connects to LANport, will be treated assameto WAN port over Internet. NAT
Mode means the IP phone will act as a router, the IP addressof LANport will be translated to
the same of WAN port. If user deploy NATmode, parameters for NATshould be inputted. The
LANport can be disabled by selecting Disableoption in LANMode.
2.5.2.2
NAT& DHCPServer
The subnet of LAN port and the device that connects to LAN port must be the same
and must be different to WAN port. There is a feature of DHCPserver in LAN port, user can
enable it for automatically assigningIPaddressto the device that connected to LANport.
Page 16
Summary of Contents for D2200-SIP
Page 5: ...D2200 SIPUserManual Page 5...
Page 35: ...Print in China Page 35...