Warning
9
(1)Select the appropriate spo2 sensor according to the type, weight and wearing position of the
tested animal.
(2)Insert the sensor plug into the socket of the monitor.
(3)Clean and disinfect the parts of the sensor in contact with the tested animal.
(4)Connect the sensor to the contact part of the tested animal.
(5)Start measuring.
The Spo2 sensor is connected to the equipment as shown in the following figure. If the
equipment is not connected to the spo2 sensor or if the spo2 sensor is inserted incorrectly, the
"probe is not connected" will be displayed at the top of the equipment screen.
8.2 Measurement process
Explosion hazard—Please do not use this product in a flammable or
explosive gas environments, such as anesthetic or nitrous oxide.
Please do not use this product during animal MRI and CT scans.
Please do not use this product if you are allergic to silicone and ABS plastics.
Please dispose of used mainframes, accessories and packaging materials
in accordance with local laws and regulations.
Figure 7
Figure 8: Correct connection
Prompt the user to properly connect the Spo2 sensor:
10
When the signal strength indicates "weak signal ", there is a "?" symbol appearing around the
SpO2. Indicates that the signal quality obtained by the Spo2 sensor is too poor or too weak. The
condition of the animal under test should be checked and the sensor placed in a suitable
location.
Data display interface
After connecting the Spo2 sensor for a few seconds, the measurement result is displayed
on the screen.
Horizontal vertical device can switch the display direction of the screen
The host uses a pulse carbon oxygen oximeter sensor to display content, range, resolution,
accuracy, and signal strength. See Appendix B.
8.3 Start measuring
Figure 9
Figure 10
Figure 11
If the tested part and the probe are not in full contact,
"probe shedding" is displayed at the top of the screen
weak signal