SONNET audio processor
28
MICROPHONE COVER
The microphone cover protects the two microphones in the SONNET from moisture and dust.
It is recommended to replace it every three months, when the microphone openings appear
dirty or when you experience degraded sound quality.
The microphone cover should either be dried or replaced when the microphone openings
have become wet as such wet openings may degrade sound quality.
To replace the microphone cover proceed as follows:
1. Remove the earhook as described in the previous section.
2. Snap off (1) the microphone cover from the control unit as shown in Fig. 20-1.
3. Insert the two lips of the new microphone cover into the two recesses of the control
unit (2) as shown in Fig. 20–2 and push the cover gently onto the control unit (3) until
it snaps completely into place (see Fig. 20-3).
4. Re-attach the earhook and insert the earhook pin as described in the previous section.
Fig. 20 Removing and attaching the microphone cover
1
3
2
1
2
3
