SONNET audio processor
13
How to configure your FineTuner
The FineTuner is configured for your individual audio processor and cannot be used by
another cochlear implant user. Your audiologist or clinical staff will configure the FineTuner
to suit your needs. Sometimes it may be necessary for you to synchronise your FineTuner
and audio processor (e.g. if you purchase a backup FineTuner). To do so, first switch off your
audio processor and place the coil on the keyboard of the FineTuner (approx. over key
MT
).
Then switch on your audio processor. The audio processor and FineTuner will be synchronised
automatically. Successful synchronisation is indicated by a short blinking signal of the two
amber indicator lights on your FineTuner.
For bilaterally implanted users
One FineTuner can be configured for use with both audio processors. If you want to use your
FineTuner for both audio processor systems, your audiologist or clinical engineer has received
the MED-EL application software manual with detailed programming information and will
assign two audio processors to your dataset. Once your audio processors are programmed
correctly, the synchronisation procedure described above should be performed with both
audio processors.
