HMI PLC all in one: TPAC1008 03 Mect srl
ME7068_05 11/19
4
2.1
Specifications
Il TPAC1008 03 is based on a multiprocessor system. PLC and HMI are based on a
454MHz ARM9, I/O interface and acquisition is managed by a Cortex M3 processor.
Two systems are on different boards and communicate via a CAN interface.
Table 1
PLC Hardware characteristics
PLC Processor
ARM926JE 454MHz
RAM
128MB
FLASH
128MB
Non volatile variables
On FLASH memory
Real Time Clock
Yes with rechargeable battery
Screen 7”
TFT 800 x 480 pixel 262k colors
Touch screen
Resistive 4 wires
Ethernet
10Mbit/s - 100Mbit/s self recognition
USB
Host 2.0
CANOpen
1 channel
Max Bit rate : 1Mbit/sec
Cycle time : 10msec
Serial output
RS485 full duplex (hardware configuration)
hardware)
Hardware I/O characteristics
Processor 1 and 2
Cortex-M3 72MHz
PLC software characteristics
OS
LINUX 2.35
PLC
IEC61131-3
Graphics
Based on QT library
CAN Bus
Not available
ModBus
Modbus RTU master
Mass Storage
Possibility of history storage
TPAC1008_03_AD
Digital inputs PNP
24+4 fast
Input Range 0 - 24Vdc +/- 15%
2 of them can be for mono/bidirectional encoder
or counter and 2 capture (ms) *
Digital outputs
PNP
16+4 fast Max output current: 200mAdc@24Vdc
