Mect TPAC1008 03 Series, User Manual

Page: 27 / 29

HMI PLC all in one: TPAC1008 03 Mect srl
ME7068_05 11/19
25
PLC_EncoderCo_Lo Reading
Encoder5 low
value RO
PLC_EncoderCo_Hi Reading
Encoder5 high
value RO
PLC_CaptureT1_Lo Capture RO time (µs) between 2 edges of digital input
IN7 low register
PLC_CaptureT1_Hi Capture RO time (µs) between 2 edges of digital input
IN7 high register
PLC_CaptureT2_Lo Capture RO time (µs) between 2 edges of digital input
IN5 low register
PLC_CaptureT2_Hi Capture RO time (µs) between 2 edges of digital input
IN5 high register
PLC_RPM Input Frequency RO Reading in Hertz
PLC_ Heartbeat Heartbeat RO I/O board Heartbeat
PLC_cella_1..
PLC_cella_3 Load cell input RO Value on 24bit
PLC_VCC Cell polarity
voltage RO Raw value in mV
PLC_Expansion_FW FW expansion
revision RO
PLC_Expansion_HW HW expansion
revision RO Bit 0..7 microcontroller revision
Bit 8..15 FPGA revision
PLC_Expansion_ER Internal
communication
error regiter RO 0: No error
1: start frame error
2: CRC error
3: failed to recieve packages
4: invalid frame
PLC_Conf_enc_1 Encoder1
Configuration RW 0 : not configured and count is 0.
1 : set monodirectional counter .
To reset: 16#11
Input A (M10-47) counter direction: 0 =
CUp, 1= CDown
Input B (M10-48) clock
2 : set bidirectional encoder .
To reset: 16#12
PLC_Conf_enc_2 Encoder 2
Configuration RW 0 : not configured and count is 0.
1 : set monodirectional counter .
To reset: 16#11
Input A (M10-50) counter direction :0 =
CUp, 1= CDown
Input B (M10-51) clock
2 : set bidirectional encoder .
To reset: 16#12
PLC_Conf_enc_3 Encoder 3
Configuration RW 0 : not configured and count is 0.
1 : set monodirectional counter .
To reset: 16#11
Input A (M10-54) counter direction :0 =
CUp, 1= CDown
Input B (M10-55) clock
2 : set bidirectional encoder .
To reset: 16#12