Mect MPNE1001 Series, User Manual

Page: 37 / 45

Inputs/outputs modules: MPNE Mect Srl
36
ME7087_13 04/21
12 Update Fast Input
14 Update Fast OUT
15
1 = Bit Set
0 = Bit Reset
To set bit 1 (Fast In managed) write:
MPNE_ControlWord_B :=
16#8002;
To reset bit 2 (Fast OUT managed)
write:
MPNE_ControlWord_B :=
16#0004;
MPNE_ControlWord_ B1
MPNE_ControlWord_ C1
MPNE_ControlWord_ D1
UINT Variable for control of special functions.
LINE: B , C , D
bit
1 Steady state OUT (High or Low)
If set to 1, the output is ON, and returns to
OFF when the trigger condition intervenes.
If set to 0 the output is OFF, and returns to
ON when the trigger condition intervenes
MPNE_FastInDelay_x UINT Time value expressed in:

µs for LINE A

ms for LINE B,C,D
MPNE_FastOutDelay_x UINT Time value expressed in:

µs for LINE A

ms for LINE B,C,D
MPNE_FastOutDuration_x UINT Time value expressed in:

µs for LINE A

ms for LINE B,C,D
MPNE_EncCounter_x DINT Encoder counter
MPNE_MatchRegister_x DINT Number of counts reached when the
associated output (if enabled) goes to ON
and remains there until it is expressly reset
by the PLC. The number as not to be 0.