4.2.5
4.2.6
4.2.7
See Fig 3b.
Zeroing the Gauge
During the operation of the gauge it is often necessary to zero the display - e.g. when you wish to tare out the
weight of a grip, so it does not become part of the measured reading. Press and release the
ZERO
ZERO
key. The
display will blink momentarily as the zero operation is carried out.
Changing the unit of measurement
You can choose from the following units of measurement depending on the capacity of your gauge: millinewtons,
kilonewtons, newtons, gram-force, kilogram-force, ounce-force or pound-force.
To change the display units press and release the
UNITS
UNITS
key. Each successive key press will select the next
available units until the gauge returns to its original setting. The BFG automatically converts readings as new units
of measure are selected.
Max (Peak) Readings
The gauge detects and stores maximum (peak) force in both compressive and tensile directions.
10
Summary of Contents for BFG 10
Page 16: ...Rear View 16 ...
