Mecmesin 432-680, Installation & Operation Manual

Page: 7 / 65

Mecmesin Interlocked Machine Guarding
Mecmesin

7
2. Guard Safety Overview
Mecmesin interlocked guarding seamlessly integrates with a Mecmesin OmniTest,
MultiTest- dV and MultiTest- i motorised test stand. The guarding helps to provide additional
ingress protection to your test system, helping to reduce the risk of an operator or object
coming into contact with a moving test stand.
The guard is designed to be used in a dry, clean and tidy environment and should be placed
on a stable and load appropriate work platform away from potentially hazardous
environments or items.
Mecmesin motorised test stands are designed to be used while under constant supervision,
the addition of an interlocked guard does not alter this requirement, failure to monitor a test
stand in operation could lead to damage to the equipment or injury to others.
A standard Mecmesin guard is designed to prevent object ingress and operator
access to moving parts, and load bearing surfaces, while the machine is in use.
For materials or test methods where there is a potential for high energy impacts
with the guarding, Mecmesin recommend consultation with their design team,
(directly or through a local agent) to correctly specify application and safety
requirements.
Before use, it is recommended that all operators of the machinery are given
comprehensive training covering both the test stand and interlock guarding’s
functionality. Preventative safety measures prior to operation, in accordance
with all relevant operator manuals, should also be considered.
Risk assessment of the guarding and associated test stand is recommended and
should be carried out where appropriate. Internal company operating
procedures should also be generated where necessary.
Mecmesin supplied interlocked guarding systems should only be serviced by a
trained Mecmesin employee or approved agent. Any attempt by non-approved
personnel may invalidate any warranty claim and could lead to damage of
equipment or injury. Always ensure correct PPE procedures are in-place and
followed where stated.
All standard Mecmesin supplied guards are fitted with clear Polycarbonate
sheeting to help maximise viewing of the test area. These sheets are fitted to the
front of twin column systems and all sides of single column guarding (Front,
rear and sides).