36/54 Page
Mechatro, INC.
User Manual
Rev. 1.5
MTP-850P / 8100P / 8100P3
8
. Paper Cut Mode.
This feature will allow you to select paper cut mode.
FOR MTP-8xxxPx series printer, the printer only can do “FULL CUT”
This feature is related to
1
Page Type.
For MTP-8xxxPx series printer, you must select among below selection.
A. OFF
Æ
No cutting
B. Full cut per Page
Æ
cutting in every page.
C. Full cut per DOC
Æ
1 cutting in one job.
Practice:
Let’s say you have send 1 job with 10 pages to the printer.
The printer will act as below;
A. OFF
The printer will continuously print all 10 pages without any cutting no matter what page
type is.
B. Full cut per Page with “Page Based” page type.
The printer will cut every page as paper size selected at Paper Tab Paper Size option.
C. Full cut per Page with “Line Based” page type.
The printer will cut every end point of the data on each page.
D. Full cut per Page with “Black Mark Based” page type.
The printer will cut on every black mark position.
E. Full cut per DOC with “Page Based” page type.
The printer will print first 9 pages continuously with out any cutting and cut the last page as
paper size selected at Paper Tab Paper Size option.
F. Full cut per DOC with “Line Based” page type.
The printer will print first 9 pages continuously with out any cutting and cut the last page at
the end point of the data.
G. Full cut per DOC with “Black Mark Based” page type.
The printer will print first 9 pages continuously with out any cutting and cut the last page
at the black mark position.
9
. Print Start Method.
This feature will allow you to print in “Real-time” or “Download the data and print”
For MTP-8100P3, only “Page Download” mode will be working.
10
. Black Mark Cut Position.
This feature will allow you to set the cutting position of your black mark in your paper.
There are 0 – 255 level increased by 1mm.
Example: 150 = 150mm
11
. Forward Feed Before Cutting.
This feature will allow you to set the length of the feeding before printer cut the paper.
Also 0 -255 level increased by 1mm.
Example: 200 = 200mm
11
. Paper Eject.
This feature will allow you to length of the paper ejected.
Also 0-255 level increased by 0.725mm.
Example: 200 = 145mm.
