26/54 Page
Mechatro, INC.
User Manual
Rev. 1.5
MTP-850P / 8100P / 8100P3
B. Using the USB interface
Connect the printer to the USB port of the computer to be used.
“L”
PC PRINTER
“Type A” “Type B”
2.6 Connecting the power
A. Procedure
Please follow the procedure as below to prevent damaging the controller board
1. Make sure your line voltage selector on the power supply is
set to your local line voltage.
2. Connect the cable from the power supply.
3. Connect the power cable to the line outlet.
4. Turn on the power supply.
B. Power Connector Information
Header =
Molex 5569-04
Housing =
Molex 5557-04
Molex 5556
Pin Function
Housing
Female
Terminal
1 24V
2 24V
3 GND
4 GND
Note: Red Cable = +24Vdc
Black Cable = GND
1
2
3
4
