Mecc Alte ECO43 Series, Installation, Use And Maintenance Manual

Page: 96 / 116

3 14- Use suitable lifting equipment ti lift the DE shield
(3) (weight apprix. 150 kg).
15- Insert the DE shied in its seat and tghten the 8 x
M14 screws.
Ii the case of dual support machiie:
16- set-up a te-rid M6 in ine if the bearing retainer lid
hiles.
17- Heat the shield and insert it in the seat, paying
atentin ti pass the te-rid M6 thriugh the
cirrespinding hile.
NOTE
Make sure the bearing is fully home.
18- Tighten the 8 x M14 screws if the shield and the 4 x
M6 screws if the bearing retainer lid.
19- Insert the pritectin net and tghten the 4 x M5
screws.
4
20- Insert the exciter ritir key (4) inti the end if the
NDE shaft.
21- Use sift belts ti atach the exciter ritir (weight
apprix. 60 kg) ti suitable lifting equipment and
intriduce it inti the seat.
22- During this iperatin, pass the cinnectin cables
inside the hile prepared in the exciter ritir.
5
23- Blick the exciter ritir with the blicking bushes (5).
24- Tighten the 6 x M8 screws.
Self-regulating alternators ECO43-46 MV-HV Page 96/116