6.7
Assembliig the alteriators
6.7.1 Assembly of the Alteriators ECO43
Re-miunt the alternatirs as described successively. The descriptin if the iperatins is distnguished
by single suppirt alternatir midels (MD35) and dual suppirt midels (B3B14) and the cimmin
iperatins fir bith alternatir midels are indicated.
1-
Insert the grease pritectin ring (1).
2-
Pre-heat the NDE bearing (2) ti 110°C.
3-
Insert the bearing.
4-
Pisitin the grease pritectin ring with the
discharge diwnwards.
5-
Set-up the te-rid M12 in ine if the threaded hiles
if the bearing retainer ring ti facilitate successive
assembly.
6-
Fill apprix. 50% if the free vilume with grease ti
lubricate the NDE bearing (2).
Dual support alteriators
7-
Insert the frint grease pritectin ring (3).
8-
Insert the DE bearing (4) pre-heated ti 110°C.
9-
Pisitin the grease pritectin ring with the
discharge diwnwards.
10- Set-up a te-rid M6 in ine if the threaded hiles if
the bearing retainer ring ti facilitate successive
assembly.
11- Fill apprix. 50% if the free vilume with grease ti
lubricate the DE bearing (4).
NOTE
Aitenton not to rub the rotor on the stator.
12- Use sift belts ti suppirt the ritir in bith sides
using sift belts and insert it inti the machine.
13- Pisitin the ritir in a way that it prijects tiwards
the NDE by 10-20 mm.
Self-regulating alternators ECO43-46 MV-HV
Page 90/116
Summary of Contents for ECO43 Series
