Mecc Alte ECO43 Series, Installation, Use And Maintenance Manual

Page: 49 / 116

The regulatirs miunted in the alternatirs are calibrated during the inal inspectin. In the case if
regulatirs supplied separately (e.g. spare parts) ir whenever cabling ir calibratin variatins are
requested, the regulatir must be calibrated accurately.
The main settings can be carried iut directly in the regulatir via 4 trimmers (VOLT - STAB - Hz -
AMP), the jumper 50/60, JP1, JP2 and the Pext input. Mire detailed settings if measurements can be
made exclusively via siftware using the USB cinnectin.
Remote coitrol of voltage
The Pext inputs (terminal 30) and ±10 V (terminal 32) alliw analigue remite cintril if the iutput
viltage via direct viltage ir a pitentimeter, with prigrammable range if variatin with respect ti
the value set via trimmer (default) ir via parameter P[19].
Vi
Vn
Vn +14%
Vmax Vmin
Vn +14%
Figure 22- Without saturaton of the output
voltage
Vi
Vn
Vn +14%
Vmax Vmin
Vn +14%
Figure 23- With saturaton of the output voltage
Whenever direct viltage is ti be used, it will have efect if within 0 Vdc/2,5 Vdc ir -10 Vdc/+10 Vdc, ,
if cinnected respectvely between terminals 30 and 29, ir 32 and 29 and in the basis if the
presence ir nit if jumpers JP1 and JP2.
Fir values that exceed these limits (ir in case if discinnectin) there are twi iptins:
●
Di nit cinsider the value and, with regulatin, gi back ti the viltage value set via trimmer
(if enabled) ir via parameter P[19] (Figure 22- );
● Maintain the minimum (ir maximum) viltage value that can be reached (Figure 23- ).
The secind iptin can be set via the RAM Viltage CTRL iptin in the Ciniguratin menu
cirrespinding ti bit B7 if the ciniguratin wird P[10]
NOTE
The direct voltage source must be able to absorb at least 2 mA.
On regulaton, it is good practce not to exceed ± 10% of the alternator voltage nominal value.
Self-regulating alternators ECO43-46 MV-HV Page 49/116