Page: 7/16
3.The C shape buckle that clips the heat exhaust hose must clip the back shell
and heat exhaust hose firmly.
Figure 3
Figure 4
3). Hold the unit with one hand and the heat exhaust hose short connector with another
hand; or both people cooperate with one person holding the unit and the other person
pulling the heat exhaust hose to prolong the heat exhaust hose gently.
Note: 1. Do not separate the heat exhaust hose assembly from the unit.
2. Do not tilt the unit when pulling apart the heat exhaust hose.
1.3 Installation of the window sealing board assembly
2). Half open the window and mount the window sealing board assembly onto the window,
either vertically or horizontally (as shown in Figure 5 and 6).
3). Pull apart the parts of the window sealing board assembly, adjust the distance of the
window sealing board assembly pulled apart so that the two ends of the assembly
come into contact with the window frame, and fasten the parts of the assembly with
copper screws.
Figure 5 Figure 6
1.4 Installation of the unit
1). Move the machine with the heat exhaust hose assembly installed before the window
and keep the unit at least 50cm away from the walls or other objects. (As shown in
Lower air duct
bottom joint
Position
of
lower air duct
bottom step
