Page: 13/16
Remote control storage area
Remote control
2). To install the evaporator filter frame and condenser filter frame, point the back end of the
filter frame toward the socket and then push the filter frame evenly and gently into the
socket.
Note: 1. Install the filter frame in the reverse order of removal. Be sure to install the filter
mesh first before the filter frame is installed.
2. Install the filter frame gently so as not to damage it
3. Cleaning of the handle position and remote control storage area
1). Take the remote control out of the remote control storage area in the direction shown by
the arrow; (as shown in Figure 16)
Figure 16
2). Clean the handle position and remote control storage area of this unit with wringed wet soft
cloth;
Note: the wet soft cloth must be wringed out. Do not drip water into the unit.
3). If the remote control needs to be put back into the remote control storage area, put it back
into the storage area in the reverse direction of removal.
Handling of the Unit
1. Handling and moving of the unit
1). To handle or move the unit, hold the top of the air outlet of the front shell with one hand
and the handle position at the top of the back shell with another hand, and leave the unit in
the upright position. (As shown in Figure 17).
Note: 1. Do not hold the horizontal louvre by hand.
2. Leave the unit in the upright position when handling or moving it.
3. To handle or move the unit, drain the water in the unit first to prevent the water in
the unit from flowing onto the ground or carpet.
4. If the remote control is in the position of the handle, take out the remote control.
