Page 11
92RT Scssor Lfts - Operator’s Manual
July 2020
Jobsite Inspection
DO NOT operate this machine until you have read and understood the Safety section of
this manual, have performed the Jobsite Inspection, Pre-Start Inspection and Routine
Maintenance, and have completed all the test operations detailed in the Operating Instructions
section�����
Inspect the jobsite and determine whether the jobsite is suitable for safe machine operation. Do this
before moving the machine to the jobsite.
Be aware of changing jobsite conditions, and continue to watch for hazards while operating the
machine.
Workplace Inspection
Check the jobsite where the machine will be used for all possible hazards, including but not limited to:
Drop-offs or holes, including those concealed by water, ice, mud, etc.
Sloped, unstable or slippery surfaces
Bumps, surface obstructions and debris
Overhead obstructions and electrical conductors
Hazardous locations and atmospheres
Inadequate surface and support to withstand all load forces imposed by the machine
Wind and weather conditions
The presence of unauthorized personnel
Other possible unsafe conditions
•
•
•
•
•
•
•
•
•
Jobsite Inspection
Secton 5 - Jobste Inspecton
