Mec 3072RT, Service Manual

Page: 43 / 100

"3072RT / 3772RT / 3772RT HD" Service & Parts Manual - ANSI Specifications March 2008
Page 2-3
DEUTSCH CONNECTORS
Deutsch connectors used on MEC equipment is
designed so that individual parts may be replaced
without replacing the entire component. Special
tools and detailed instructions are provided in
Deutsch Connector field kits.
Male Plug Connector
• Use the flat end of the Removal Tool or a flat
blade screwdriver to pry the locking wedge from
the connector, taking care not to damage the
Sealing Gasket.
• Inspect and replace damaged parts.
• Replace or re-crimp wires and contacts.
Female receptacle Connector
• Use the notched end of the removal tool or a
wire hook to pull the locking wedge from the
connector
• Replace worn or damaged parts
• Replace or re-crimp wires and contacts.
Locking Fingers
• Remove the locking wedge as outlined above.
• Using the removal tool or a flat blade screw-
driver, push the Locking Fingers aside to re-
lease the contact.
• Pull the wire and contact out of the connector.
Heavy Duty Plug
• Slide the removal tool along the wire to be
replaced and push into the connector to release
the contact.
• Pull the wire and contact out of the plug.
Crimping
• Strip 1/4 in. (6mm) insulation from the wire.
• Insert the contact into the crimping tool and insert the stripped wire into the contact making
sure no wires are outside the contact barrel.
• Close the handles of the crimping tool, then release the handles to remove the crimped
contact.
ART_2041
Deutsch Connector Field Kit
MEC part # 84091