Measurement Computing PCI-DAS6031 User Manual Download Page 3 | Manualshive

Page: 3 / 52

background image

Your new Measurement Computing product comes with a fantastic extra —

Management committed to your satisfaction!

Refer to

www.mccdaq.com/execteam.html

for the names, titles, and contact information of each key executive at Measurement

Computing.

Thank you for choosing a Measurement Computing product—and congratulations! You own the finest, and you can now enjoy
the protection of the most comprehensive warranties and unmatched phone tech support. It’s the embodiment of our two
missions:

!

To offer the highest-quality, computer-based data acquisition, control, and GPIB hardware and software available—at
the best possible price.

!

To offer our customers superior post-sale support—FREE. Whether providing unrivaled telephone technical and sales
support on our latest product offerings, or continuing that same first-rate support on older products and operating
systems, we’re committed to you!

Lifetime warranty:

Every hardware product manufactured by Measurement Computing Corporation is warranted against

defects in materials or workmanship for the life of the product. Products found defective are repaired or replaced promptly.

Lifetime Harsh Environment Warranty®:

We will replace any product manufactured by Measurement Computing

Corporation that is damaged (even due to misuse) for only 50% of the current list price. I/O boards face some tough operating
conditions



some more severe than the boards are designed to withstand. When a board becomes damaged, just return the unit

with an order for its replacement at only 50% of the current list price. We don’t need to profit from your misfortune. By the way,
we honor this warranty for any manufacturer’s board that we have a replacement for.

30 Day Money Back Guarantee:

You may return any Measurement Computing Corporation product within 30 days of

purchase for a full refund of the price paid for the product being returned. If you are not satisfied, or chose the wrong product by
mistake, you do not have to keep it. Please call for an RMA number first. No credits or returns accepted without a copy of the
original invoice. Some software products are subject to a repackaging fee.

These warranties are in lieu of all other warranties, expressed or implied, including any implied warranty of merchantability or
fitness for a particular application. The remedies provided herein are the buyer’s sole and exclusive remedies. Neither
Measurement Computing Corporation, nor its employees shall be liable for any direct or indirect, special, incidental or
consequential damage arising from the use of its products, even if Measurement Computing Corporation has been notified in
advance of the possibility of such damages.

ii

HM PCI-DAS6031_33.doc

«
1
2
3
4
5
...
»

Summary of Contents for PCI-DAS6031





















































Reviews:

No comments

Related manuals for PCI-DAS6031

Brand: CHIPS Pages: 32

Brand: OBID Pages: 38

Brand: TRENDnet Pages: 15

Skylark WMU2000

Brand: Alien Pages: 28

Brand: Duali Pages: 12

Brand: Gigabyte Pages: 35

855-S1610040400

Brand: ddm hopt+schuler Pages: 25

Brand: Conceptronic Pages: 21

Sound Blaster 16

Brand: Creative Structures Pages: 95

Brand: Billion Pages: 34

Brand: Atid Pages: 2

Brand: Siemens Pages: 4

Brand: Siemens Pages: 8

Bewator PR500EM

Brand: Siemens Pages: 10

Brand: Siemens Pages: 10

Brand: Siemens Pages: 14

Brand: Siemens Pages: 52

SIMATIC RF1070R

Brand: Siemens Pages: 58

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands