miniLAB 1008 User's Guide
Calibrating and Testing the Device
To perform the scan test, do the following:
1.
Click on the
Scan Test
tab. The following dialog is shown configured with its
default settings.
2.
Click on the
Scan Options
button. The
Scan Options
dialog opens. This dialog is
shown configured with its default settings.
3.
4.
Select the channel(s) to scan, range, rate that you want to perform the scan test on
and click
OK
.
Connect an external signal to each channel to be scanned, press the
Start
button,
and verify the waveform(s) displayed in the plot area.
In the following example, a square wave is input to channel 0, and a sine wave is
input to channel 1.
5-8