Measurement Computing miniLAB 1008, User Manual, Page: 28 / 78

miniLAB 1008 User's Guide Installing the miniLAB 1008
The serial number shown in the dialog is a custom number automatically assigned
by
Insta Cal when you install the miniLAB 1008.
If Insta Cal does not detect the miniLAB 1008
If the Plug and Play Board Detection dialog does not display, go to " If the miniLAB
1008 is not detected by InstaCal " on page 2-10.
2. Leave the check box next to the miniLAB 1008 item checked, and click
OK
.
The dialog closes, and the miniLAB 1008 is added to the
PC Board List
on the
InstaCal
main form.
If the miniLAB 1008 is not detected by Insta Cal
If the
Plug and Play Board Detection
dialog does not appear, exit Insta Cal (
Exit
option on the
File
menu). Make sure that you connected the USB cable properly,
and that you are running a supported operating system (Microsoft® Windows® 98
(2
nd
edition), Windows ME, Windows 2000, or Window XP). Then, run Insta Cal
again.
If your USB connection is good, and you are running a supported operating system,
but
Insta Cal still does not detect the miniLAB 1008, notify Measurement
Computing Corporation by phone, fax, or email:
o
o
o
Phone: 508-946-5100 and follow the instructions for reaching Technical
Support.
Fax: 508-946-9500 to the attention of Technical Support
Email: techsupport@measurementcomputing.com
2-10