2
1.2 LED Indication
If KSR-01IP is used as IP Router without physical address x.y.0, LED A6 (Physical
address routing)
works not like described here.
Table 1: LEDs Colors
State IP (Main line)
green:
Main line OK
red:
Manual Function active
Bus state KNX TP (Subline)
green:
Subline OK
Telegram tra fc IP (Main line)
green, blink.: Tel egram trafc extent
red, blink.:
Transmission error
Telegram tra fc KNX TP (Subline)
green, blink.: Tel egram trafc extent
red, blink.:
Transmission error
Group Address routing
green:
Filter active
orange:
Route all
red:
Block all
<off>:
Main line / subline different
Physical Address routing
green:
Filter active
orange:
Route all
red:
Block all
<off>:
Main line / subline different
Programming
red:
Program Mode
red, blink.:
No IP connection
A1
A2
A3
A4
A5
A6
A7
1.3 Commissioning
Please note for commissioning with default settings:
● The Manual Function switch-off time is 120 min
● Physical address is 15.15.0
●
WARNING: Do not connect to 230 V
Figure 2: Connection Scheme
KSR-01IP
KNX cable
Ethernet
KNX
Device
+
-