Step 4: When the „request update“ button appears it has to be pressed to select the
update file and enter “Boot Mode”.
Step 5: The update file can be selected and uploaded. Clicking on the „Abort“ button
cancels the firmware update procedure and the device exits Boot Mode.
5.5 IP Tunnelling Address Assignment
According to the host's physical address assignment the first tunnelling address
(additional physical address) of the KSR-01IP can only be set by ETS.
Note: Please make sure: The additional physical addresses for tunnelling and the
host´s physical address have to be different.
Step 1: Open the ETS Bus tab and select KSR-01IP as the “Current Interface”. In the
“IP Tunneling” window the already assigned host physical address can be
read.
Figure 20: Request Update
Figure 21: Select Update File
21