46
NOTE:
Always remove key and disconnect battery cables by pulling rearward on
RED BATTERY QUICK
DISCONNECT HANDLE
in battery box compartment when any maintenance or repairs are performed on
mower unit!
Always disconnect batteries when transporting unit
. Keep unit free of grass clippings, leaves and other
debris.
DO NOT
spray battery/electronics compartment with water to clean unit.
Use only compressed air or blower or air vacuum cleaner
. Wear
adequate PPE
(Personal Protective
Equipment), eye and hearing protection when cleaning the unit. Always wear safety glasses and protective
gear near batteries. Use insulated tools.
3. Regular maintenance
Regular maintenance is the best prevention for costly downtime or expensive, premature repair
.
The following pages contain suggested maintenance information and schedules which the operator should
follow on a routine basis. For more detailed information order the correct parts manual for your unit. Remain
alert for unusual noises, they could be signaling a problem. Visually inspect the machine for any abnormal
wear or damage. A good time to detect potential problems is while performing scheduled maintenance
service. Correcting the problem as quickly as possible is the best insurance.
Daily inspect
mower for grass clippings and wire and string tangles. The underside of the mower deck
may collect a buildup of grass clippings and dirt, especially when grass is wet or has high moisture content.
This build-up will harden, restricting blade and air movement and will probably show a poorer quality of
cutting. Therefore, it should be removed routinely. To do this it will be necessary to raise and block the
deck, using jack stands or blocks, in the full up position and scrape the build-up from underneath. Some
repairs require the assistance of a trained service mechanic and should not be attempted by unskilled
personnel. Consult authorized MGE MEAN GREEN dealer when assistance is needed.
4.
Torque values
WARNING: Particular attention must be given to tightening the drive wheel lug nuts and blade
spindle bolts
. Failure to correctly torque these items may result in the loss of a wheel or blade, which can
cause serious damage or personal injury. Call your authorized MGE MEAN GREEN dealer for assistance.
Torque values are given below:
•
Torque value of
wheel (lug) nuts
…………………
88 to 102 N.m
•
Blade spindle bolt
bottom
(SILVER motor)
.…….
41 N.m
Lug nuts only -
It is recommended that these be checked after the first 2 hours of operation, initially, every
100 hours and following removal for repair or replacement.
