27
•
HI / LOW blade speed switch (Fig. H) HIGH (3450 RPM) LOW (3250 RPM): located on top mower
control panel HIGH blade mode is higher blade speed for cutting thicker grass. LOW blade mode
provides lower blade speed used for lower battery consumption on thinner dry grass areas.
NOTE: Mowing time may be increased up to 15% when mowing in low blade mode when practical.
•
Optiona
l LED lights switch (Fig. H):
Turns headlight ON and OFF when additional light is needed.
•
Optional
front debris blower switch (Fig. H):
turn switch clock wise to turn
ON
blower with 2 blower
speeds available – RUN and BOOST. Use BOOST mode intermittently (5 minutes max) to keep motor
from overheat conditions.
•
Optional
blower rotation switch (Fig. I):
control of blower nozzle to left or right direction.
•
Drive speed control switch (Fig. H) –
Located on top mower control panel.
Allows operator to select a
comfortable driving speed LOW or HIGH depending on terrain, grass conditions, slope, operator experience
etc.
Flip the switch to LOW, slow speed for inexperienced operators, for trimming around objects, buildings
and other obstacles (trees, plants).
IMPORTANT:
When battery voltage becomes low, the drive motors will reduce speed and enter the
“CREEP” Mode (3,2 km/h)
enabling driver to continue to drive unit.
Operator should disengage deck
blades and the unit should immediately be returned to the battery charging area and connected to
the battery charger.
Always EASY DOES IT when unsure or new user to the equipment! Get comfortable with mower before
pushing the switch into HIGH speed!
RIGHT SIDE OF
MOWER
LEFT SIDE OF
MOWER
LED LIGHT
(Optional)
ROTATING FRONT BLOWER (Optional)
Fig. J1
Fig. J2
