39
Operating Wind Window
In the Wind Window press the SET button to recall:
•
Wind chill temperature with wind direction in bearings
•
Wind chill temperature with a wind direction in compass points
•
Temperature at anemometer and wind direction in compass points
•
Temperature at anemometer and wind direction in bearings
Programming Wind Speed Units
In the Wind Window, press and hold SET button to set the wind speed units in km/h, mph, m/s or
knots.
Viewing Wind Statistics
In the Wind Window, press the MEMORY button to recall:
•
Current wind speed
•
Daily maximum wind speed with “DAILY MAX” displayed
•
Wind gust speed with a “GUST” displayed
•
Daily maximum gust speed with a “GUST DAILY MAX” displayed
Resetting Wind Statistics Memory
In the Wind Window, press and hold MEMORY button to reset all wind statistics.
Activating or Deactivating Alarms
In the Wind Window press ALARM/CHART button to recall
•
Current wind speed
•
Wind speed alarm with the “ALARM HI” displayed
•
Wind gust alarm with the “GUST ALARM HI” displayed
•
Daily maximum wind speed with “DAILY MAX” displayed
If the specific alarm is disabled, “OFF” will be displayed; otherwise the alarm value will be shown.
When the wind alarm is displayed, press the UP or DOWN arrow button to activate or deactivate it.
.
Programming High Wind Alarm
•
In the Wind Window, press ALARM/CHART button to select the desired alarm (wind
speed or wind gust speed)
•
Press and hold ALARM/CHART button until speed digit will flash.
•
Set the alarm using the UP or DOWN. Press and hold either button for fast digits
advance.
•
Press ALARM/CHART button to confirm your selection and return to the high wind alarm
selection screen.
