33
Once the time signal has been successfully received, the time and date will be updated
automatically.
To enable or disable the atomic time receiver:
•
Press and hold UP - if atomic time reception is activated, a triangular tower icon will start
flashing next to the clock icon. If reception is disabled, the triangular tower icon will
disappear.
Icon
Atomic Time Reception Strength
(Flashing)
Undefined data
Reception failed for 24 hours
Weak signal, but can be decoded
Strong signal
Sunrise/Sunset Window
The main unit is able to calculate the sunrise and sunset times depending on the user defined
location. The location data contains the longitude, latitude, time zone and DST (Daylight Saving
Time).
If the closest city code is selected, the main unit will automatically generate all of the correct data
for specified location.
If you cannot find the closest city code or would like to enter your specific location, select “USR” as
the city code during the setup.
A search function is also available. It allows viewing the sunrise/sunset times for different dates.
.
Accessing Sunrise/Sunset Window
From the main unit: Press UP or DOWN arrow button until the sunrise and sunset icons
on the lower left of the display will start flashing. From the remote control: Press .
Programming Your Location
In the Sunrise/Sunset Window, press and hold SET until the city code in the Time Window will
flash entering the location programming mode.
•
Select the city code closest to your area by pressing the UP or DOWN arrow button.
Refer to P. for a list of available codes. The corresponding longitude and latitude will be
