Meade MAX-ACF Instruction Manual Download

Page: 39 / 60

Tip:

If the "ENTER to Sync" fea-
ture is accessed by mistake
(holding the ENTER key for
more than 2 seconds),
press MODE to return to
the previous screen.

in the sky.

Sidereal:

The default setting for Autostar II; sidereal rate is the standard rate

at which stars move from East to West across the sky due to the rotation of
the Earth.

Lunar:

Choose this option to properly track the Moon over long observing

sessions.

Solar:

Choose this option when observing the Sun.

Custom

: Allows entry of user-defined tracking rates.

Note: Custom Tracking Rate

allows you to enter values from -999.999 to 999.999.

The lower the number, the slower the rate; the higher the number the faster the rate.
If you enter -999, the telescope will move so slow as to appear to be stopped. If you
enter 999, the telescope will be moving at approximately twice the tracking rate.

쩦

Guiding Rate:

Allows you to change the base slew speed, 1x. Enter a percent-

age of the speed (less than 100%) and press ENTER. This function may be use-
ful in guiding the telescope during CCD and long-exposure photography. See

SLEW SPEEDS

, page 26, for more information.

쩦

Dec Guiding:

Allows a user using an autoguider to disengage autoguider inputs.

Allows you to select N & S, North only, South only, and off.

쩦

Reverse L/R:

Reverses the functions of the Left and Right Arrow keys for con-

trolling the telescope's motion (

i.e., the Right key moves the telescope to the left).

쩦

Reverse U/D:

Reverses the functions of the Up and Down Arrow keys for con-

trolling the telescope's motion (

i.e., the Up key moves the telescope down).

쩦

Home Sensor:

Turns off or on the True North sensor, if preferred, for Easy, One-

Star, and Two-Star alignment. The default setting for this menu is "On."

쩦

GPS Alignment:

Allows three options. Select "Off" if you wish to align the tele-

scope manually (turns off GPS). Select "On" (default setting) if you wish to auto-
matically align your telescope and want the telescope to get the GPS fix when it
is needed during alignment. Select "At Start Up" if you want the telescope to get
a GPS fix when the telescope is powered up.

쩦

R.A. PEC:

Allows you to perform periodic error correction on the R.A. drive worm

gear. Must be performed with a high-power reticle (

eg., 9mm). You may restore

the factory default setting by selecting “On.”

쩦

High Precision:

If High Precision is turned on, when looking for a faint celestial

object (

e.g., a nebula or galaxy), Autostar II first slews to a nearby bright star and

displays "ENTER to Sync." Center the star in the eyepiece, then press ENTER.
At that point the telescope has a high precision alignment to that part of the sky
and it then slews to the object that was originally requested.

Time

: Changes the time entered into Autostar II. Setting the correct time is critical for

Autostar II to properly calculate locations and events. Time may be set to "AM," "PM,"
or 24-hour mode (military time). To select the 24-hour mode, press ENTER when the
the "blank" option displays (

i.e., neither "AM" nor "PM" is displayed).

Targets:

Switches between Astronomical targets and Terrestrial targets. If

"Astronomical" is selected, the telescope tracking motor is activated and any object
you observe in the sky will remain centered in the eyepiece. If "Terrestrial" is select-
ed, the tracking motor is turned off.

Date:

Changes the date used by Autostar II. This function is useful to check events in

the past or future.

For example: Set the Date menu for a day three months in the

future. Then check the "Select Item: Event" menu for the Sunset time on that date. See

EVENT MENU

, page 35.

Daylight Saving

: Enables or disables the Daylight Savings time setting.

Note

: Daylight Savings Time may be referred to by different names in vari-

ous areas of the world. Check local time to verify.