Meade MAX-ACF, Instruction Manual

Page: 13 / 60

4 FOCUS : Toggles between two functions. The first press allows you to
change the focus and focus speed. The next press allows you to create
presets that tell the telescope where to focus.
5 SS : Press to display the Solar System library.
6 STAR: Press to display the Star library.
7 RET (Reticle): Press to display the Reticle Control menu.
8 IC : Press to display the Index Catalog library.
9 NGC (New General Catalog): Press to display the NGC catalog library.
0 LIGHT : Press to turn on and off the red utility light on the top of the hand-
box.
h
Scroll Keys : Press to access options within a selected menu. The menu is dis-
played on the first line of the screen. Options in the menu are displayed, one at a
time, on the second line. Press the Scroll keys to move through the options. Press
and hold a Scroll key to move quickly through the options.
The Scroll keys also control the speed of text scrolling on the Autostar II display.
When text is scrolling, press and hold the Up Scroll key for a faster display speed
and the Down Scroll key for a slower display speed.
i
? Key : Press to access the "Help" file. "Help" provides on-screen information on
how to accomplish whatever task is currently active.
Press the ? key and then follow the prompts on the display to access details of
Autostar II functions in the Help feature. The Help system is essentially an on-
screen instruction manual.
If you have a question about an Autostar II operation, e.g., INITIALIZATION,
ALIGNMENT, etc., press the ? key and follow the directions that scroll on the sec-
ond line. When satisfied with the Help provided, press MODE to return to the orig-
inal screen and continue with the chosen procedure.
j
Coil Cord Port : Plug one end of the Autostar II coil cord ( 10, Fig. 2 ) into this port
located at the bottom of the Autostar II handbox.
1)
Coil Cord : Plug one end of the Autostar II coil cord into the HBX port ( F, Fig. 1d )
of the computer control panel of the telescope and the other end into the Autostar
II coil cord port. See
j
above.
1!
Utility Light : Use this built-in red light to illuminate star charts and accessories
without disturbing your eye's adaptation to darkness. Press "0" to turn the light on
and off.
13
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the
Sun. Do not look through the telescope as it is moving.