Autoguider
2
26
6.
In the Focal Length field, type in the focal length of your telescope.
7.
Locate a star using your telescope’s alignment and Go To procedures. Focus and prepare the imager as
described earlier in this manual.
8.
Draw a tracking box around the star.
9. Click the Start button.
10. When you click on the Start button, the program begins to calibrate. It then begins to autoguide your
telescope and displays X and Y error coordinates in the Status Display box (24).
11. Click the Abort button (the Start button renamed) when you are finished.
If you don’t move your telescope or rotate the guider assembly, you do not need to recalibrate. However, if you
wish to recalibrate, click on the Reset Cal button.
Note that you do not need to check the Track button to use this feature.
